Acura TLX: the short answer
The Acura TLX runs a 5×120 mm (5×4.72″) wheel bolt pattern — 5 studs on a 120 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Acura TLX bolt pattern
The Acura TLX bolt pattern is 5×120 mm (5×4.72″). It has changed across generations — see the table below.
Acura TLX
5x1205 lugs · 120 mm · 4.72″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2015–2020 (1st gen) | 5x114.3 | 5×4.5″ |
| 2021–present (2nd gen) | 5x120 | 5×4.72″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Acura TLX; verify against your owner's manual.
FAQ
What is the Acura TLX bolt pattern?
The Acura TLX uses a 5×120 mm (5×4.72″) bolt pattern on its current generation (earlier generations differ — see the table). That's 5 lugs on a 120 mm (4.72″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my TLX?
Vehicles like the Acura MDX, BMW 3 Series, BMW 5 Series share the 5x120 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x120 mean in inches?
5x120 is the same as 5×4.72″ — 120 mm converts to 4.72 inches.
The Acura TLX bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.