Wheel fitment

Dodge Charger bolt pattern

The Dodge Charger bolt pattern is 5×127 mm (5×5″). It has changed across generations — see the table below.

Dodge Charger

5x127

5 lugs · 127 mm · 5″ PCD

Bolt pattern by generation
YearsBolt patternIn inches
2011–2023 (LD) 5x115 5×4.53″
2024–present (LB; Daytona EV + 2026 Sixpack gas) 5x127 5×5″

New platform switched to 5x127 (5x5")

Dodge Charger: the short answer

The Dodge Charger runs a 5×127 mm (5×5″) wheel bolt pattern — 5 studs on a 127 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.

Before you buy wheels

A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.

Reference value for the Dodge Charger; verify against your owner's manual.

Sources & verification

Source links and page assumptions reviewed .

FAQ

What is the Dodge Charger bolt pattern?

The Dodge Charger uses a 5×127 mm (5×5″) bolt pattern on its current generation (earlier generations differ — see the table). That's 5 lugs on a 127 mm (5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.

Will wheels from another vehicle fit my Charger?

Vehicles like the Chrysler Pacifica, Dodge Durango, Jeep Gladiator share the 5x127 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.

What does 5x127 mean in inches?

5x127 is the same as 5×5″ — 127 mm converts to 5 inches.

The Dodge Charger bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.