Ford F-250 Super Duty: the short answer
The Ford F-250 Super Duty runs a 8×170 mm (8×6.69″) wheel bolt pattern — 8 studs on a 170 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Ford F-250 Super Duty bolt pattern
The Ford F-250 Super Duty bolt pattern is 8×170 mm (8×6.69″).
Ford F-250 Super Duty
8x1708 lugs · 170 mm · 6.69″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 1999–present | 8x170 | 8×6.69″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Ford F-250 Super Duty; verify against your owner's manual.
FAQ
What is the Ford F-250 Super Duty bolt pattern?
The Ford F-250 Super Duty uses a 8×170 mm (8×6.69″) bolt pattern. That's 8 lugs on a 170 mm (6.69″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my F-250 Super Duty?
A wheel needs the same 8x170 bolt pattern plus a compatible center bore and offset. Matching the pattern alone does not guarantee a fit.
What does 8x170 mean in inches?
8x170 is the same as 8×6.69″ — 170 mm converts to 6.69 inches.
The Ford F-250 Super Duty bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.