Ford Fusion: the short answer
The Ford Fusion runs a 5×108 mm (5×4.25″) wheel bolt pattern — 5 studs on a 108 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Ford Fusion bolt pattern
The Ford Fusion bolt pattern is 5×108 mm (5×4.25″). It has changed across generations — see the table below.
Ford Fusion
5x1085 lugs · 108 mm · 4.25″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2006–2012 (1st gen) | 5x114.3 | 5×4.5″ |
| 2013–2020 (2nd gen) | 5x108 | 5×4.25″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Ford Fusion; verify against your owner's manual.
FAQ
What is the Ford Fusion bolt pattern?
The Ford Fusion uses a 5×108 mm (5×4.25″) bolt pattern on its current generation (earlier generations differ — see the table). That's 5 lugs on a 108 mm (4.25″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Fusion?
Vehicles like the Ford Bronco Sport, Ford Edge, Ford Escape share the 5x108 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x108 mean in inches?
5x108 is the same as 5×4.25″ — 108 mm converts to 4.25 inches.
The Ford Fusion bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.