GMC Acadia: the short answer
The GMC Acadia runs a 6×120 mm (6×4.72″) wheel bolt pattern — 6 studs on a 120 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
GMC Acadia bolt pattern
The GMC Acadia bolt pattern is 6×120 mm (6×4.72″). It has changed across generations — see the table below.
GMC Acadia
6x1206 lugs · 120 mm · 4.72″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2007–2016 (1st gen, Lambda) | 6x132 | 6×5.2″ |
| 2017–present (2nd gen) | 6x120 | 6×4.72″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the GMC Acadia; verify against your owner's manual.
FAQ
What is the GMC Acadia bolt pattern?
The GMC Acadia uses a 6×120 mm (6×4.72″) bolt pattern on its current generation (earlier generations differ — see the table). That's 6 lugs on a 120 mm (4.72″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Acadia?
Vehicles like the Buick Enclave, Cadillac XT5, Chevrolet Blazer share the 6x120 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 6x120 mean in inches?
6x120 is the same as 6×4.72″ — 120 mm converts to 4.72 inches.
The GMC Acadia bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.