GMC Canyon: the short answer
The GMC Canyon runs a 6×120 mm (6×4.72″) wheel bolt pattern — 6 studs on a 120 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
GMC Canyon bolt pattern
The GMC Canyon bolt pattern is 6×120 mm (6×4.72″).
GMC Canyon
6x1206 lugs · 120 mm · 4.72″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2015–present (2nd–3rd gen) | 6x120 | 6×4.72″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the GMC Canyon; verify against your owner's manual.
FAQ
What is the GMC Canyon bolt pattern?
The GMC Canyon uses a 6×120 mm (6×4.72″) bolt pattern. That's 6 lugs on a 120 mm (4.72″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Canyon?
Vehicles like the Buick Enclave, Cadillac XT5, Chevrolet Blazer share the 6x120 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 6x120 mean in inches?
6x120 is the same as 6×4.72″ — 120 mm converts to 4.72 inches.
The GMC Canyon bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.