Mercedes-Benz E-Class: the short answer
The Mercedes-Benz E-Class runs a 5×112 mm (5×4.41″) wheel bolt pattern — 5 studs on a 112 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Mercedes-Benz E-Class bolt pattern
The Mercedes-Benz E-Class bolt pattern is 5×112 mm (5×4.41″).
Mercedes-Benz E-Class
5x1125 lugs · 112 mm · 4.41″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2000–present | 5x112 | 5×4.41″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Mercedes-Benz E-Class; verify against your owner's manual.
FAQ
What is the Mercedes-Benz E-Class bolt pattern?
The Mercedes-Benz E-Class uses a 5×112 mm (5×4.41″) bolt pattern. That's 5 lugs on a 112 mm (4.41″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my E-Class?
Vehicles like the Audi A3, Audi A4, Audi A5 share the 5x112 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x112 mean in inches?
5x112 is the same as 5×4.41″ — 112 mm converts to 4.41 inches.
The Mercedes-Benz E-Class bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.