Rivian R1T: the short answer
The Rivian R1T runs a 5×139.7 mm (5×5.5″) wheel bolt pattern — 5 studs on a 139.7 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Rivian R1T bolt pattern
The Rivian R1T bolt pattern is 5×139.7 mm (5×5.5″).
Rivian R1T
5x139.75 lugs · 139.7 mm · 5.5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2022–present (64.1 mm bore; M14x1.5) | 5x139.7 | 5×5.5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Rivian R1T; verify against your owner's manual.
FAQ
What is the Rivian R1T bolt pattern?
The Rivian R1T uses a 5×139.7 mm (5×5.5″) bolt pattern. That's 5 lugs on a 139.7 mm (5.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my R1T?
Vehicles like the Ram 1500, Rivian R1S share the 5x139.7 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x139.7 mean in inches?
5x139.7 is the same as 5×5.5″ — 139.7 mm converts to 5.5 inches.
The Rivian R1T bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.