What this lookup is for
You own a Ram 1500, a Rivian R1T or R1S, or another full-size truck/SUV and you are comparing wheels that share the five-lug 5x139.7 (5x5.5-inch) bolt pattern.
Bolt pattern cross-reference
5×139.7 mm (5×5.5″) — 3 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.
Every vehicle above bolts to a 5x139.7 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.
You own a Ram 1500, a Rivian R1T or R1S, or another full-size truck/SUV and you are comparing wheels that share the five-lug 5x139.7 (5x5.5-inch) bolt pattern.
5x139.7 is the traditional American truck five-lug pattern, commonly called 5x5.5 inches, and in our data it covers the Ram 1500 and Rivian R1T/R1S. It is one of the most widely produced truck patterns in the US, so the aftermarket is deep — but Ram hubs, Rivian hubs, and older GM/Toyota truck hubs are not identical, and offsets and load ratings vary by generation. A 5x139.7 wheel is only a starting point; verify bore, offset, and load for your exact truck.
Source links and page assumptions reviewed .
In our data, 3 vehicles use 5x139.7 (5×5.5″), including Ram 1500, Rivian R1S, Rivian R1T. More are being added.
They share the 5x139.7 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.
5x139.7 equals 5×5.5″ — 139.7 mm is 5.5 inches across the pitch circle.
Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.