Cadillac Escalade: the short answer
The Cadillac Escalade runs a 6×139.7 mm (6×5.5″) wheel bolt pattern — 6 studs on a 139.7 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Cadillac Escalade bolt pattern
The Cadillac Escalade bolt pattern is 6×139.7 mm (6×5.5″).
Cadillac Escalade
6x139.76 lugs · 139.7 mm · 5.5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2021–present | 6x139.7 | 6×5.5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Cadillac Escalade; verify against your owner's manual.
FAQ
What is the Cadillac Escalade bolt pattern?
The Cadillac Escalade uses a 6×139.7 mm (6×5.5″) bolt pattern. That's 6 lugs on a 139.7 mm (5.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Escalade?
Vehicles like the Chevrolet Silverado 1500, Chevrolet Suburban, Chevrolet Tahoe share the 6x139.7 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 6x139.7 mean in inches?
6x139.7 is the same as 6×5.5″ — 139.7 mm converts to 5.5 inches.
The Cadillac Escalade bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.