Dodge Challenger: the short answer
The Dodge Challenger runs a 5×115 mm (5×4.53″) wheel bolt pattern — 5 studs on a 115 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Dodge Challenger bolt pattern
The Dodge Challenger bolt pattern is 5×115 mm (5×4.53″).
Dodge Challenger
5x1155 lugs · 115 mm · 4.53″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2008–2023 (LC) | 5x115 | 5×4.53″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Dodge Challenger; verify against your owner's manual.
FAQ
What is the Dodge Challenger bolt pattern?
The Dodge Challenger uses a 5×115 mm (5×4.53″) bolt pattern. That's 5 lugs on a 115 mm (4.53″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my Challenger?
Vehicles like the Cadillac CT4, Chevrolet Equinox, Chevrolet Malibu share the 5x115 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x115 mean in inches?
5x115 is the same as 5×4.53″ — 115 mm converts to 4.53 inches.
The Dodge Challenger bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.