Bolt pattern cross-reference

Vehicles with a 5x115 bolt pattern

5×115 mm (5×4.53″) — 7 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.

5x115 vehicles (5×4.53″)
VehicleYearsDetails
Cadillac CT4 2020–present (CT4 / CT4-V; the CT4-V Blackwing uses 5x120) View →
Chevrolet Equinox 2018–present (3rd–4th gen) View →
Chevrolet Malibu 2016–2025 (9th gen; discontinued after 2025) View →
Chrysler 300 2011–2023 (LX/LD; production ended December 2023) View →
Dodge Challenger 2008–2023 (LC; discontinued after 2023) View →
Dodge Charger 2011–2023 (LD) View →
GMC Terrain 2018–present (2nd gen 2018–2024, 3rd gen 2025+) View →

Same pattern ≠ guaranteed swap

Every vehicle above bolts to a 5x115 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.

What this lookup is for

You own a Chevrolet Equinox or Malibu, GMC Terrain, Dodge Charger or Challenger, Chrysler 300, or Cadillac CT4 and you are comparing wheels that share the 5x115 bolt pattern.

What the list does — and doesn't — tell you

5x115 groups GM crossovers and sedans with the Dodge/Chrysler LX-platform cars in our data. The GM and FCA hubs use different center bores — GM vehicles are usually hub-centric on a larger bore, while the Charger/Challenger/300 share a smaller hub — so a Camaro-style wheel will not necessarily center on a Malibu. Offset also differs between sedans and the Terrain/Equinox. Confirm bore, offset, and load rating before buying.

Checks before you buy

  • Verify the center bore for your specific make; GM and FCA bores differ.
  • Check offset against your model's stock wheels.
  • Confirm the wheel load rating is adequate for a crossover if you drive an Equinox or Terrain.

Sources & verification

Source links and page assumptions reviewed .

Other bolt patterns

4x100 (4×3.94″) · 5 vehicles 4x114.3 (4×4.5″) · 2 vehicles 5x100 (5×3.94″) · 9 vehicles 5x108 (5×4.25″) · 14 vehicles 5x110 (5×4.33″) · 3 vehicles 5x112 (5×4.41″) · 34 vehicles 5x114.3 (5×4.5″) · 76 vehicles 5x120 (5×4.72″) · 21 vehicles 5x120.65 (5×4.75″) · 1 vehicles 5x127 (5×5″) · 6 vehicles 5x130 (5×5.12″) · 7 vehicles 5x135 (5×5.31″) · 1 vehicles 5x139.7 (5×5.5″) · 3 vehicles 5x150 (5×5.91″) · 3 vehicles 6x114.3 (6×4.5″) · 1 vehicles 6x120 (6×4.72″) · 7 vehicles 6x132 (6×5.2″) · 1 vehicles 6x135 (6×5.31″) · 4 vehicles 6x139.7 (6×5.5″) · 22 vehicles 8x165.1 (8×6.5″) · 1 vehicles 8x170 (8×6.69″) · 1 vehicles All bolt pattern tools →

FAQ

What vehicles have a 5x115 bolt pattern?

In our data, 7 vehicles use 5x115 (5×4.53″), including Cadillac CT4, Chevrolet Equinox, Chevrolet Malibu, Chrysler 300, Dodge Challenger, Dodge Charger. More are being added.

Are 5x115 wheels interchangeable between these vehicles?

They share the 5x115 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.

What is 5x115 in inches?

5x115 equals 5×4.53″ — 115 mm is 4.53 inches across the pitch circle.

Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.