Infiniti QX60: the short answer
The Infiniti QX60 runs a 5×114.3 mm (5×4.5″) wheel bolt pattern — 5 studs on a 114.3 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.
Wheel fitment
Infiniti QX60 bolt pattern
The Infiniti QX60 bolt pattern is 5×114.3 mm (5×4.5″).
Infiniti QX60
5x114.35 lugs · 114.3 mm · 4.5″ PCD
| Years | Bolt pattern | In inches |
|---|---|---|
| 2014–present | 5x114.3 | 5×4.5″ |
Before you buy wheels
A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.
Reference value for the Infiniti QX60; verify against your owner's manual.
FAQ
What is the Infiniti QX60 bolt pattern?
The Infiniti QX60 uses a 5×114.3 mm (5×4.5″) bolt pattern. That's 5 lugs on a 114.3 mm (4.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.
Will wheels from another vehicle fit my QX60?
Vehicles like the Acura Integra, Acura RDX, Acura TLX share the 5x114.3 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.
What does 5x114.3 mean in inches?
5x114.3 is the same as 5×4.5″ — 114.3 mm converts to 4.5 inches.
The Infiniti QX60 bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.