Wheel fitment

Nissan Kicks bolt pattern

The Nissan Kicks bolt pattern is 5×114.3 mm (5×4.5″). It has changed across generations — see the table below.

Nissan Kicks

5x114.3

5 lugs · 114.3 mm · 4.5″ PCD

Bolt pattern by generation
YearsBolt patternIn inches
2018–2024 (P15; also the 2025 carryover 'Kicks Play') 4x100 4×3.94″
2025–present (2nd gen) 5x114.3 5×4.5″

Redesign switched to 5x114.3

Nissan Kicks: the short answer

The Nissan Kicks runs a 5×114.3 mm (5×4.5″) wheel bolt pattern — 5 studs on a 114.3 mm pitch circle. To swap wheels you need that same pattern plus a compatible center bore and offset.

Before you buy wheels

A matching bolt pattern is the first filter, not a green light. Check the hub center bore and the offset/backspacing, and make sure there's brake-caliper clearance. Confirm everything on the door-jamb sticker or manual.

Reference value for the Nissan Kicks; verify against your owner's manual.

Sources & verification

Source links and page assumptions reviewed .

FAQ

What is the Nissan Kicks bolt pattern?

The Nissan Kicks uses a 5×114.3 mm (5×4.5″) bolt pattern on its current generation (earlier generations differ — see the table). That's 5 lugs on a 114.3 mm (4.5″) pitch circle. Confirm against your door-jamb sticker before buying wheels.

Will wheels from another vehicle fit my Kicks?

Vehicles like the Acura Integra, Acura MDX, Acura RDX share the 5x114.3 pattern, so their wheels are worth checking — but the bolt pattern is only the first match. You still need a compatible center bore and offset, so confirm those before buying.

What does 5x114.3 mean in inches?

5x114.3 is the same as 5×4.5″ — 114.3 mm converts to 4.5 inches.

The Nissan Kicks bolt pattern shown is a well-documented reference value. Confirm your exact bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying wheels. A shared bolt pattern does not by itself guarantee a wheel will fit.