What this lookup is for
You own a Chevrolet Corvette and are looking for wheels that use the 5x120.65 pattern, which differs slightly from the more common 5x120.
Bolt pattern cross-reference
Vehicles with a 5x120.65 bolt pattern
5×120.65 mm (5×4.75″) — 1 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.
| Vehicle | Years | Details |
|---|---|---|
| Chevrolet Corvette | 2005–2019 (C6/C7) | View → |
Same pattern ≠ guaranteed swap
Every vehicle above bolts to a 5x120.65 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.
What the list does — and doesn't — tell you
In our data only the Chevrolet Corvette uses 5x120.65, a five-lug pattern on a 120.65 mm pitch circle. The 0.65 mm difference from 5x120 matters: a wheel stamped 5x120 will not locate the lugs precisely and can stress the studs and hubs. Treat 5x120.65 as its own pattern, not as a 5x120 variant. Because the cross-reference is small, verify any candidate wheel is actually drilled for 120.65 mm before it is mounted on a Corvette.
Checks before you buy
- Confirm the wheel is drilled 5x120.65 mm, not the close 5x120 pattern.
- Check the Corvette's hub bore and offset requirements for your generation.
- Verify caliper clearance, since Corvette brakes fill the wheel barrel.
Sources & verification
Source links and page assumptions reviewed .
- NHTSA: TireWise tire safety guidance — Official U.S. guidance on tire size, the Tire and Loading Information placard, load ratings, and maintenance.
FAQ
What vehicles have a 5x120.65 bolt pattern?
In our data, 1 vehicles use 5x120.65 (5×4.75″), including Chevrolet Corvette. More are being added.
Are 5x120.65 wheels interchangeable between these vehicles?
They share the 5x120.65 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.
What is 5x120.65 in inches?
5x120.65 equals 5×4.75″ — 120.65 mm is 4.75 inches across the pitch circle.
Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.