What this lookup is for
You own a GMC Acadia and are checking whether wheels from other vehicles use the six-lug 6x132 bolt pattern.
Bolt pattern cross-reference
Vehicles with a 6x132 bolt pattern
6×132 mm (6×5.2″) — 1 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.
| Vehicle | Years | Details |
|---|---|---|
| GMC Acadia | 2007–2016 (1st gen, Lambda) | View → |
Same pattern ≠ guaranteed swap
Every vehicle above bolts to a 6x132 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.
What the list does — and doesn't — tell you
In our data only the GMC Acadia uses 6x132. It is an uncommon six-lug pattern, so the cross-reference is short and aftermarket options are limited. Do not assume a 6x120 or 6x139.7 wheel can be substituted: the pitch circle must be exactly 132 mm. Verify the wheel is stamped 6x132, then confirm hub bore, offset, and load rating for your Acadia trim before mounting.
Checks before you buy
- Verify the wheel pattern is 6x132 mm; similar six-lug patterns are not interchangeable.
- Check the Acadia's hub bore and use rings if the wheel bore is larger.
- Confirm offset and brake clearance for your trim.
Sources & verification
Source links and page assumptions reviewed .
- NHTSA: TireWise tire safety guidance — Official U.S. guidance on tire size, the Tire and Loading Information placard, load ratings, and maintenance.
FAQ
What vehicles have a 6x132 bolt pattern?
In our data, 1 vehicles use 6x132 (6×5.2″), including GMC Acadia. More are being added.
Are 6x132 wheels interchangeable between these vehicles?
They share the 6x132 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.
What is 6x132 in inches?
6x132 equals 6×5.2″ — 132 mm is 5.2 inches across the pitch circle.
Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.