What this lookup is for
You own a Toyota Tundra, Toyota Sequoia, or Lexus LX and are looking for wheels that share the five-lug 5x150 bolt pattern.
Bolt pattern cross-reference
Vehicles with a 5x150 bolt pattern
5×150 mm (5×5.91″) — 3 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.
Same pattern ≠ guaranteed swap
Every vehicle above bolts to a 5x150 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.
What the list does — and doesn't — tell you
5x150 is the Toyota full-size truck pattern in our data, covering the Tundra, Sequoia, and Lexus LX. Toyota has used this pattern on these models for many years, so a good cross-section of factory and aftermarket wheels exist, but hub bores and offsets changed across generations — the current Tundra and Sequoia hubs differ from older ones. Verify the wheel is drilled 5x150 for your generation and that the bore, offset, and load rating match before mounting.
Checks before you buy
- Match the generation: newer Tundra/Sequoia hubs differ from pre-2022 models in some specs.
- Confirm hub bore and use rings where the wheel bore is larger.
- Check offset and caliper clearance, especially on the Lexus LX's larger brakes.
Sources & verification
Source links and page assumptions reviewed .
- NHTSA: TireWise tire safety guidance — Official U.S. guidance on tire size, the Tire and Loading Information placard, load ratings, and maintenance.
FAQ
What vehicles have a 5x150 bolt pattern?
In our data, 3 vehicles use 5x150 (5×5.91″), including Lexus LX, Toyota Sequoia, Toyota Tundra. More are being added.
Are 5x150 wheels interchangeable between these vehicles?
They share the 5x150 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.
What is 5x150 in inches?
5x150 equals 5×5.91″ — 150 mm is 5.91 inches across the pitch circle.
Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.