What this lookup is for
You drive a Nissan Frontier and want to know which wheels share the six-lug 6x114.3 bolt pattern.
Bolt pattern cross-reference
Vehicles with a 6x114.3 bolt pattern
6×114.3 mm (6×4.5″) — 1 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.
| Vehicle | Years | Details |
|---|---|---|
| Nissan Frontier | 2005–present | View → |
Same pattern ≠ guaranteed swap
Every vehicle above bolts to a 6x114.3 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.
What the list does — and doesn't — tell you
In our data only the Nissan Frontier uses 6x114.3. It is the Frontier's long-standing six-lug pattern, shared with some Nissan SUVs historically, but the current cross-reference is intentionally narrow because the pattern is uncommon. A six-lug wheel with a different pitch circle — like 6x139.7 — will not bolt on, so verify the stamped pattern on the wheel before purchase. Confirm hub bore, offset, and load rating for your Frontier generation.
Checks before you buy
- Confirm the wheel is drilled 6x114.3 mm and not the similar six-lug truck patterns.
- Check the Frontier's hub bore and add rings if needed.
- Verify offset and that the wheel clears the brake calipers and suspension.
Sources & verification
Source links and page assumptions reviewed .
- NHTSA: TireWise tire safety guidance — Official U.S. guidance on tire size, the Tire and Loading Information placard, load ratings, and maintenance.
FAQ
What vehicles have a 6x114.3 bolt pattern?
In our data, 1 vehicles use 6x114.3 (6×4.5″), including Nissan Frontier. More are being added.
Are 6x114.3 wheels interchangeable between these vehicles?
They share the 6x114.3 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.
What is 6x114.3 in inches?
6x114.3 equals 6×4.5″ — 114.3 mm is 4.5 inches across the pitch circle.
Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.