Bolt pattern cross-reference

Vehicles with a 4x114.3 bolt pattern

4×114.3 mm (4×4.5″) — 2 vehicles in our data share this pattern. A shared pattern means their wheels are worth checking, once you also confirm center bore and offset.

4x114.3 vehicles (4×4.5″)
VehicleYearsDetails
Nissan Sentra 2007–2012 (B16) View →
Nissan Versa 2007–2011 (C11) View →

Same pattern ≠ guaranteed swap

Every vehicle above bolts to a 4x114.3 hub, so they clear the first and biggest filter. But a wheel also has to match the center bore (or use hub-centric rings) and run a workable offset, with room for the brakes. Treat this list as your shortlist of what to measure — not a promise of a bolt-on fit.

What this lookup is for

You drive a Nissan Sentra or Nissan Versa and want to know which other wheels share the four-lug 4x114.3 bolt pattern before shopping for replacements or winter wheels.

What the list does — and doesn't — tell you

Only two vehicles in our data use 4x114.3, both Nissans, which makes this a small cross-reference. Four-lug 114.3 mm is close to the more common 4x100 and 4x108 patterns, but 'close' is not interchangeable: lugs must sit on exactly the same pitch circle. A wheel stamped 4x100 or 4x108 will not center correctly and can loosen over time. Use the list to identify genuine 4x114.3 candidates, then confirm center bore and offset for your Sentra or Versa trim.

Checks before you buy

  • Read the bolt pattern printed on the wheel or the hub spec before purchase.
  • Reject wheels with a different pitch circle even if the lug count matches.
  • Verify hub bore and use hub-centric rings when the wheel bore is larger than the hub.

Sources & verification

Source links and page assumptions reviewed .

Other bolt patterns

4x100 (4×3.94″) · 5 vehicles 5x100 (5×3.94″) · 9 vehicles 5x108 (5×4.25″) · 14 vehicles 5x110 (5×4.33″) · 3 vehicles 5x112 (5×4.41″) · 34 vehicles 5x114.3 (5×4.5″) · 76 vehicles 5x115 (5×4.53″) · 7 vehicles 5x120 (5×4.72″) · 21 vehicles 5x120.65 (5×4.75″) · 1 vehicles 5x127 (5×5″) · 6 vehicles 5x130 (5×5.12″) · 7 vehicles 5x135 (5×5.31″) · 1 vehicles 5x139.7 (5×5.5″) · 3 vehicles 5x150 (5×5.91″) · 3 vehicles 6x114.3 (6×4.5″) · 1 vehicles 6x120 (6×4.72″) · 7 vehicles 6x132 (6×5.2″) · 1 vehicles 6x135 (6×5.31″) · 4 vehicles 6x139.7 (6×5.5″) · 22 vehicles 8x165.1 (8×6.5″) · 1 vehicles 8x170 (8×6.69″) · 1 vehicles All bolt pattern tools →

FAQ

What vehicles have a 4x114.3 bolt pattern?

In our data, 2 vehicles use 4x114.3 (4×4.5″), including Nissan Sentra, Nissan Versa. More are being added.

Are 4x114.3 wheels interchangeable between these vehicles?

They share the 4x114.3 bolt pattern, which is the first requirement — but interchangeability also depends on center bore, offset, and brake clearance. Use this list to know what to check, then confirm those specs before fitting wheels from another vehicle.

What is 4x114.3 in inches?

4x114.3 equals 4×4.5″ — 114.3 mm is 4.5 inches across the pitch circle.

Vehicle lists reflect well-documented bolt patterns and are a starting reference. Confirm bolt pattern, center bore, and offset against the door-jamb sticker or owner's manual before buying or swapping wheels.